Welding Neck Flange

PŘÍRUBY KRKOVÉ PŘÍRUBY ANSI B 16.9 - Welding Neck Flange 1.4301, 1.4404, 1.4541, 1.4571 forged flanges VPreÝROBNÍ PROGRAM: DN 10 - 4000 PN 2,5 - 400 bar NORMY: ČSN 131229 - 39 ( stará ČSN ) ČSN 131160 typ 11 EN 1092-1, typ 11 ANSI B 16.9 - Welding Neck Flange DIN 2627 - 2638 JAKOST: tř. 11 ( 11416.1, P245GH, P250GH, A105, C22.8 ... ) tř. 15 ( 15128.5, 16Mo3, 13CrMo4-5, 10CrMo9-10 ... ) tř. 17 ( 1.4301, 1.4404, 1.4541, 1.4571 ... ) Standard ANSI, ASME, DIN, BS, JIS, GB, ISO

FORGED FLANGES AND COLLARS EN 1092-1. Circular flanges for pipes, valves, fittings and accessories, PN designated. Available in steel grades 304, 304L, 316, 316L (1.4301, 1.4307, 1.4401, 1.4404). Welding-neck flanges conform to PED.

S355J2H (1.0576) welding neck flanges made from fine grain steel. Features include high tensile strength (470-630 MPa), excellent impact resistance (27J at -20°C), and compliance with EN 10210-1/EN 10219-1 standards for structural applications.

Material to UNS S31803 (and the other specifications listed below) is described as a duplex stainless steel with a microstructure of 50:50 austenite and ferrite. The steel combines good mechanical strength (typically up to over 480 MPa yield strength) and ductility with moderate to good corrosion resistance in a variety of environments. By agreement, the alloy can be supplied with a PREN (Pitting Resistance Equivalent) at >34 which ensures that the resistance to pitting

Grade :S420NNumber:1.8902Classification:Alloy special structural steelStandard:EN 10025-3: 2004 Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steelsEN 10113-2: 1993 Hot-rolled products in weldable fine grain structural steels. Delivery conditions for normalized/normalized rolled steels Chemical composition % of steel S420N (1.8902): EN 10025-3-2004Nominal thickness =< 63(mm) CEV max = 0

SA 182 Gr F11 Socket Weld Flanges Chemical Composition Table Grade C Mn Si P S Cr Mo Alloy Steel F11 0.5-0.15 0.3-0.6 0.5-1.0 0.03 0.03 1.0-1.5 0.44-0.65 ASTM A182 Grade F11 Flange Mechanical Analysis Tensile Strength Yield Strength (0.2%Offset) Elongation 205 415 20 % ASTM A182 Gr F11 Cl.2 RTJ Flange Pressure Ratings A182 F11 Class 2 Plate Flange manufacturer in India, check f11 steel material equivalent as per ASME B16.47 Series a/ b Temperature Ratrings 150# Class 300#

Flangee Material Carbon steel ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH P250GH, P280GHM 16MN, 20MN ,20# Stainless steel ASTM A182, F304/304L, F316/316L Alloy steel ASTM A182 A182 F12,F11,F22,F5,F9,F91etc. Flange Standard ANSI Class 150 Flanges-Class 2500 Flanges DIN 6Bar 10Bar 16Bar 25Bar 40Bar JIS 5K Flanges-20K Flanges UNI 6Bar 10Bar 16Bar 25Bar 40Bar EN 6Bar 10Bar 16Bar 25Bar 40Bar Flange TYPE 1.Welding neck Flange; 2.Slip on 3.Blind flange 4.Long

Standard Specifications ASTM A182 / A240 & ASME SA182 / SA240 Dimensions ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. Standard BS (British Standard) DIN, EN (European) ASA/ANSI/ASME B16.5/16.36/16.47A/16.47B B16.47 Series A & B B16.48 BS4504 BS 10 EN-1092 GOST Flange MSS S44 ISO 70051 JIS B2220 BS1560-3.1 API 7S-15 API 7S-43 API 605 EN 1092 Size Range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 or special sizes Connect Type/ Flange Face Type

ASTM A350 LF2 – Carbon Steel ASTM A350 Grade LF2 is a general Carbon steel usually supplied in the Normalised, Normalised and Tempered or Quench and Tempered condition. It is typified by having moderate strength and impact toughness and is used extensively for the manufacture of flanges and fittings, and applications which require cold temperature service where corrosion resistance is not important Standards ASME B16.5, EN1092 Material ASTM A105,A350,A266 etc Size 1/2"-24"