Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xMaterial | Astm A105n | Type | Spectacle Blind Galvanised Flanges |
---|---|---|---|
Standard | Asme B16.48 Figure 8 | Flange | Spectacle Blind Flange |
High Light | ASTM A105N Spectacle Blind Flange,ASME B16.48 Spectacle Blind Flange,Galvanised Spectacle Blind Flanges |
asme b16.48 figure 8 spectacle blind galvanised flanges ASTM A105N Spectacle Blind Flange
Standard | Type | Class | Size |
ASME B16.5 | WN/LWN/SO/Blind/Lap Joint | 150#-2500# |
1/2"-24" (Except Blind Flange 2500lb 1/2"-12") |
SW flange | 150#-1500# |
1/2"-3" (Except 1500# 1/2"-2 1/2") |
|
Threaded | 150#-900# | 1/2"-24" | |
1500# 2500# | 1/2"-2 1/2" | ||
ASME B16.47 Series A | WN/blind flange | 150# -900# |
22"-48" (Except 900# Size:26"-48") |
ASME B16.47 Series B | WN/blind flange | 75#-300# | 26"-48" |
400# 600# 900# | 26"-36" | ||
DIN2527 | Blind flange | PN6-PN100 | DN10-DN1000 |
DIN2543 | SO flange | PN16 | DN10-DN1000 |
DIN2544 | SO flange | PN25 | DN10-DN1000 |
DIN2545 | SO flange | PN40 | DN10-DN500 |
DIN2565 | Threaded flange with Neck | PN6 | DN6-DN200 |
DIN2566 | Threaded flange with Neck | PN16 | DN6-DN150 |
DIN2567 | Threaded flange with Neck | PN25 PN40 | DN6-DN150 |
DIN2568 | Threaded flange with Neck | PN64 | DN10-DN150 |
DIN2569 | Threaded flange with Neck | PN100 | DN10-DN150 |
EN1092-1:2002 |
Plate flange for welding/ loose plate flange with weld-on plate collar or for lapped pipe end/Blind Flange/WN flange |
PN2.5-PN100 | DN10-DN4000 |
JIS B2220 |
Welding flange, lap joint flange, threaded flange |
PN6-PN100 | DN10-DN1500 |
BS4504 BS10 TableD/E |
Plate Flange for welding/ WN flange/blank Flange |
PN6-PN100 | DN10-DN1500 |
Other Products |
Anchor/swivel/girth/l ap joint/reducing/orifice |
||
Spectacle blind/paddle blind/ spacer ring/orifice plate/bleed ring |
|||
Special Products: rings/ forgings/disc/shaft sleeves |
|||
Sealing Surface | RF FF RTJ TF GF LF LM | ||
Flange Face Finish |
Stock finish/spiral serrated/ concentric serrated/smooth finish (Ra 3.2 and 6.3 micrometers) |
||
125-250 AARH(it is called smooth finish) | |||
250-500 AARH(it is called stock finish) | |||
Coating | Vanish, yellow paint, anti-rust oil, galvanizing etc | ||
Material Grade | Nickel Alloy Steel |
ASTM/ASME B/SB564 UNS N02200(NICKEL 200), UNS N04400(MONEL 400), |
|
UNS N08825( INCOLOY 825),UNS N06600(INCONEL 600), | |||
UNS N06601(INCONEL 601), UNS N06625(INCONEL 625), UNS N10276(HASTELLOY C276), |
|||
ASTM/ASME B/SB160 UNS N02201(NICKEL 201), ASTM B/SB472 UNS N08020(Alloy 20) |
|||
Copper Alloy |
ASTM/ASME B/SB151 UNS C70600(CuNi 90/10), C71500(CuNi 70/30) |
||
Stainless Steel |
ASTM/ASME A/SA182 F304,304L,304H,309H,310H, 316,316H,316L,316LN, |
||
317,317L,321,321H,347,347H | |||
Duplex and Super Duplex Steel |
ASTM/ASME A/SA182 F44,F45,F51,F53,F55,F60,F61 |
||
Carbon steel | ASTM /ASME A/SA105(N) | ||
Low Temp Carbon Steel | ASTM/ASME A/SA350 LF2 | ||
High Yield Carbon Steel | ASTM/ASME A/SA694 F52,F56 F60, F65, F70 | ||
Alloy Steel |
ASTM/ASME A/SA182 GR F5, F9, F11,F12,F22,F91 |
||
Titanium | ASTM/ASME B/SB381 Grade 2, Grade 5, Grade 7 |