Round Well Casing Pipe Continuously Cast Iron 80-55-06 Partially Pearlite Ductile Iron

Place of Origin China
Brand Name Best
Certification API
Model Number 114.3 - 508 mm
Minimum Order Quantity 1 Tons
Price 600 usd/ton
Packaging Details bundle,,painting against corrosion, protective plastic caps, special packing can be offered by customer.
Delivery Time 5-8 working days
Payment Terms L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability 100000Ton/Month

Contact me for free samples and coupons.

Whatsapp:0086 18588475571

Wechat: 0086 18588475571

Skype: sales10@aixton.com

If you have any concern, we provide 24-hour online help.

x
Product Details
Standard API 5CT, API 5D Grade K55, J55, L80-1 ,N80,C90,C95, P110, T95
Out Diameter API J55, API K55, API L80, Application Oil Pipe
Surface Copper Coated Specification 2 3/8"-4 1/2"*0.167"-0630"
High Light

steel casing pipe

,

seamless casing pipe

Leave a Message
Product Description

Product Name :

 

Continuously Cast Iron G2 - Highly Pearlitic Gray Iron

 

Continuously Cast Iron
80-55-06 Partially Pearlite Ductile Iron 
 
80-55-06 Partially Pearlite Ductile Iron
Characteristics
− Grade 80-55-06 ductile iron will contain nodular graphite in a matrix of ferrite and pearlite. The pearlite/ferrite structure provides higher wear resistance and strength when compared to a ferritic grade of ductile iron. This material will be readily machinable with good surface finishes. Tensile and yield strengths will be similar to AISI 1040 steel in the as-rolled condition. This specification is similar to ASTM A536 grade 80-55-06. 
 
Typical Applications
Fluid Power:
Cylinder Blocks, Gerotors, Manifolds, Pistons, Glands, Rotors, Valve Bodies.
Machinery:
Bushings, Chain Sheave Rollers, Chuck Bodies, Die Blocks, Gears, Gear Racks, Pulleys, Press Rams, Rotary Tables, Tie Road Nuts, Ways, Barrel Rollers (cement truck), Flywheels, Pile Drivers, Pulleys, Rams.
Transportation:
Pulleys, Gears, Rail Spacers.
Pump and Compressor:
Gears, Housings, Liners, Pistons, Rotary Screws.
Steel Mill:
Guide Rolls, Pinch Rolls, Runout Table Rolls.
Miscellaneous:
Disamatic Pouring Rails, Dies, Pattern Plates, Core Boxes, Grinding Rolls, Mill Liners 
 
Typical Heat Treatment
− Grade 80-55-06 can be oil quench hardened from 1600˚F (885˚C) to a Rockwell C 50 minimum on the outside of the bar. The inside diameter hardness will be less than Rockwell C50. Lower quench hardnesses on the inside diameters are a result of larger graphite nodules and not a loss of matrix hardness. Typical Jominy end quench test data are shown in the section on Heat Treating.
Mechanical Properties
− The tensile strength is determined from a longitudinal test specimen taken from mid-radius of the as-cast bar.
− Tensile strength (min) - 80,000psi
− Yield strength (min) - 55,000psi
− Elongation (min) – 6%
− In bars under 1.5" diameter elongation will be 4-6%.

 

 

 

Characteristics
− This specification covers a dense fine-grained gray iron produced by the continuous cast process. The "highly pearlitic" structure is developed by alloy additions to the electrically melted base iron. This material is suitable for applications where higher strength irons requiring good wear resistance and response to heat treatment are required.
Typical Applications
− Hydraulic-pump rotors, gear blanks, rams, machine-tool gibs, foundry patterns plates, ways, collets, etc.
Typical Heat Treatment
− This iron can be hardened by fast methods, such as flame and induction hardening, in addition to conventional quench and temper methods. Gray Iron can be oil quench hardened from 1575˚F (855˚C) to a Rockwell "C" 50 minimum on the outside diameter of the bar. The inside diameter hardness will be less than Rockwell "C" 50. Lower quench hardnesses on the inside diameters are a result of larger graphite flakes and not a loss of matrix hardness.
Mechanical Properties
− Machining characteristics of this alloy are excellent. Although the hardness of the material is generally higher than found in static castings, the close grain structure, its freedom from inclusions, hard spots and porosity permit superior machining speeds.

 

 

Carbon Cold Finished  C12L14 
 
Characteristics
− A leaded free-machining steel, essentially for manufacturing parts that require considerable machining/threading with close tolerances and a bright, smooth finish. It is especially suitable for automatic screw machines. Not recommended for forming or welding; or parts subject to severe fatigue stress. Cold finished product is manufactured in conformance to ASTM A108 
 
Typical Applications
− Fasteners, bushings, inserts, couplings
 
Cast Iron Continuously Cast Iron 65-45-12 Ductile Iron
 
Characteristics
− Ferritic, as-cast, 65-45-12, ductile iron will be the softest of the regular grades of ductile iron. The matrix structure will contain some pearlite and less than 5% well dispersed carbides. In bars over 2 in. (51 mm) diameter the pearlite content will range up to 25%. This microstructure permits high speed machining with good surface finishes. . 
 
Typical Applications
− Hydraulic-pump rotors, gear blanks, rams, machine-tool gibs, foundry patterns plates, ways, collets, valve bodies, manifolds, compressor valves, hydraulic cylinder bushings, rod bushings, etc..
Typical Heat Treatment
− Because of its ferritic structure, this material is not intended for hardening
Mechanical Properties
− As-cast 65-45-12, ductile iron has approximately the same tensile and yield strengths as hot rolled SAE 1035 steel in the as-rolled condition. Elongations in as-cast, 65-45-12 will be slightly lower than SAE 1035 steel in the as-rolled condition. This material is manufactured to produce material similar to ASTM specification A536.
− Tensile tests are taken from the actual as-cast bar.
− Tensile Strength (min)* - 65,000 psi
− Yield Strength (min)* - 45,000psi
− Elongation (min)* - 12%
− * Determined as prescribed by ASTM standards

 

Carbon Cold Finished
1045 Chrome Plated Shafting 
 
Carbon ASTM A105 & ASTM A350-LF2 DUAL CERTIFIED
- a Special Quality Fine Grain Carbon-Manganese Steel for Piping Components 
 
Characteristics
− A105 and A350-LF2 are standard specifications for forged carbon steel piping components. A105 for ambient and higher-temperature service; A350-LF2 for low-temperature service with Charpy V-Notch impact energy testing. Components include flanges, various fittings and valves.
− Some components may be machined from hot rolled or forged bar, suitably heat treated, up to and including NPS 4. See details in the ASTM designations
 
Typical Applications
− A105 allows that for each .01% Carbon below .35, an increase of .06% Manganese is permitted over 1.05 to a maximum of 1.35. This explains the typical analysis above.
Typical Heat Treatment
− Forging – Commence 1150˚C Max finish 925⁰C.
− Annealing – 800˚ to 830˚C Surface cool
− 870/ 915˚C air Cool
− Normaling – 830˚C to 850˚C water quench
− Hardening – 850˚C to 870˚C oil quench.
− Tempering – 425˚C to 870˚C according to properties
 
Characteristics
− The basic product is cold drawn, precision ground and polished AISI 1045 shafting with a seam free surface finish of RMS 25 max. The bars are then hard chrome plated by electrolytically deposited layer of chromium metal on the surface. This hard chromed surface confers the important properties of corrosion resistance and wear resistance; it is also very smooth and therefore has a low coefficient of friction. Not least of all, it has an attractive and durable decorative appearance. 
 
Typical Applications
− Hydraulic shafting, pneumatic piston rods, pump shafting, etc
Chrome Plating
− Finished thickness of – .0005" min per side (Winnipeg Branch: 0.001”min per side)
− Hardness of chrome – Rockwell C 65/70
− Surface finish – RMS 12 max 

 

 

Carbon AISI/SAE 1040-1045 (UNS G10400-G10450)
- a Special Bar Quality Medium-Carbon Machinery Steel 
 
Characteristics
− General purpose, fine grain, machinery steel suitable for a wide range of applications in the condition as supplied - approximately 90,000 psi (620 N/mm2) depending on the size of section. This steel is primarily water- hardening, but may also be quenched in oil. Excellent wear resistance can be obtained by flame or induction hardening. Care required if welding, due to higher carbon content. Good machinability
 
Typical Applications
− Shafts, axles, spindles, bolts, lightly stressed gears, machined parts of all types.
Typical Heat Treatment
− Forging – Commence 1150˚C Max finish 925⁰C.
− Annealing – 800˚ to 830˚C Surface cool
− 870/ 915˚C air Cool
− Normaling – 830˚C to 850˚C water quench
− Hardening – 850˚C to 870˚C oil quench.
− Tempering – 425˚C to 870˚C according to properties
 
Mechanical Properties
− Typical – as supplied
− Tensile Strength – 90,000 psi (620 N/mm2)
− Yield Strength – 23,000 psi (410 N/mm2)
− Elongation – 25%
− Reduction of Area – 50%
− Hardness – HB 201
− Machinability – 65

 

Carbon AISI/SAE 1018 COLD FINISHED (UNS G10180)
- Cold Drawn '20' Carbon Steel, available in all bar sections 
 
Characteristics
− Most cold finished bars are produced by cold drawing oversize hot rolled bars through a die. The cold reduction of the bar results in significantly improved mechanical properties, with a smooth surface finish to close tolerances. The cold working of the bar likewise improves machinability, usually rated at 76. Larger bars are often produced by turning and polishing only. In this case, the properties of the steel are not improved and remain the same as the original hot rolled, special quality bar. The product is easy to weld and readily responds to carburizing. Cold finished product is manufactured in conformance to ASTM A108
Typical Applications
− All forms of shafting and machinery parts. When carburized -gears, pinions, king pins 
 
Carbon Cold Finished  1045 Induction Hardened 
 
Characteristics
− As with chrome plated shafting, the basic material is cold drawn, precision ground and polished AISI 1045 shafting. It is first induction hardened which results in surface hardness of approx. Rockwell C 55.
− This improves the properties of the bar and the extra hardness ensures superior wear resistance. The bars are then hard chrome plated in the same way as chrome plated shafting with the same advantages of corrosion and wear resistance. However, the induction hardened bar will give superior service 
 
Typical Applications
− Hydraulic shafting, oil and water pump shafting, rotary pump shafts, and piston rods
Chrome Plating
− Finished thickness of – .0005" min per side (Winnipeg Branch: 0.001”min per side)
− Hardness of chrome – Rockwell C 65/70
− Surface finish – RMS 12 max
 
Induction Hardening
− Case Depth – .050” min
− Case Hardness – Rockwell C50 min
Tolerances
− Allowance is made for the chrome plating and standard minus tolerances
− apply as ASTM A29, Table A1.12
− See AISI 1045 Chrome Plated Shafting
Mechanical Properties
− Typical 75,000 psi minimum yield strength
 
Carbon Cold Finished
1144
Characteristics
− This product is severely cold worked to produce 100,000 psi minimum yield strengths. It can therefore compete for application and use in parts normally requiring heat treated alloy grades in the HB range 235/277. The bars are stress relieved to minimize warpage. The sulphur content enhances machinability. C1144 has excellent induction hardening properties. Welding is not recommended. Conforms to ASTM A311, Class B. Available in cold drawn and precision ground surface finishes
 
Typical Applications
− Arbors, keyed shafts, spindles, gears, pinions, pump shafts, machined parts in wide variety
Mechanical Properties
− Typical – as supplied, Not normally available over 4" dia. because of the cold working required
− Tensile Strength – 125,000 psi (862 N/mm2)
− Yield Strength – 100,000 psi (690 N/mm2)
− Elongation – 12%
− Reduction of Area – 20%
− Hardness – HB 255
− Machinability – 82
Tolerances
− For cold finish tolerances See 1045 TG&P

 

Carbon AISI/SAE 1018 COLD FINISHED
(UNS G10180)
Size Tolerances –Rounds Tolerances
- all tolerances are MINUS
11/2" dia. (38.1 mm) and under
Minus 0.002” (.050 mm)
Over 1 1/2" dia. to 2 1/2" dia (63.5 mm)
Minus 0.003” (.075 mm)
Over 2 1/2" dia. to 4" dia (101.6 mm)
Minus 0.004” (.100 mm)
Over 4" dia. to 6" dia (152.4" mm)
Minus 0.005” (.125 mm)
Over 6" dia. to 8" dia (203.2 mm)
Minus 0.006” (.150 mm)

 

Carbon 1018 
 
Characteristics
− Produced to the requirements of ASTM A576 , this special bar quality, low-carbon machinery steels, is extremely versatile. It machines well and is easily weldable. The steel grade can be carburized 
 
Typical Applications
− Bearing in mind the tensile strength of approximately 60,000 psi (414 N/mm2), the steel is suitable for a wide variety of general engineering parts, shafts, studs, bolts, tie-rods etc 
 
Mechanical Properties
− Typical as supplied
− Tensile Strength – 58,000 psi
− 2Tensile Strength – 400 N/mm2
− Yield Strength – 32,000 psi
− 2Yield Strength – 220 N/mm2
− Elongation – 25%
− Reduction of Area – 50%
− Hardness – HB 116 
 
Comment
− This product may also conform to the requirements of ASTMA36 complete with the mechanical property requirements detailed below
− Tensile Strength – 58,000 – 80,000 psi
− Yield Strength – 36,000 psi minimum, 250 Mpa minimum
− Elongation minimum – 20% 
Aluminum Extrusions
Aluminum Squares and Rounds Only 6061
 
Bronze Aluminum Bronze Alloy 954 
Characteristics
− Produced conforming to ASTM B505, Alloy 954 Aluminum Bronze is produced oversized to finish, machine to the nominal size ordered.
− Density: 0.340 lb/in3 at 68ºF; 9.41 g/cm3 at 20ºC 
 
Mechanical Properties
− Yield – 35,000 psi
− Tensile Strength – 85,000 psi
− Elongation – 18%
− Hardness – 140-170 HBN
Bronze SAE660 Bearing 
 
Characteristics
− Produced conforming to ASTM B505, SAE660 Bearing Bronze
(Bars and Tubes). Produced oversized. to finish, machine to the
nominal size ordered.
− Density: 0.322 lb/in3 at 68ºF; 8.91 g/cm3 at 20ºC
 
Typical Applications
− Industrial Machinery & Equipment Market: In-plant Equipment, Industrial Valves & Fittings, Turbines, Off-highway Vehicles
− Products: Bushings, Plumbing Valves, Air Brakes, Brass Anodes for Plating, Brass Plating of Steel Belts in Tires, Wear Plates in Cranes, Hydraulic Seals, Gears, Bearings, Valve Stems, Turbine seals, Flanges
− Transportation Equipment Market: Automotive Non-electrical, Railroad, Marine, Aircraft
− Products: Motors, General Hardware, Carburetor Assemblies, Fittings
− Military Market: All Specified Military Applications
− Water Handling Equipment: Alloys used in Marine service and products such as seawater piping, pumps, valves, etc
− Special Market (Fastest Growing Market) Products: Food Processing Equipment, Hydraulic Seals, Plumbing Valves, Wear Plates and Guides
 
Mechanical Properties
− Yield – 18,000 psi
− Tensile Strength – 35,000 psi
− Elongation – 20%
− Hardness – 60-70 HBN
 
Characteristics
− This is the least expensive and most versatile of the heat-treatable aluminum alloys and offers a good range of properties. It is generally selected where welding or brazing is required and for its high corrosion resistance
 
Typical Applications
− General engineering and structural components. Trucks and trailers. Boats.
− Furniture. Pipe fittings. Miscellaneous parts requiring good corrosion resistance.
 
Mechanical Properties
− Minimum Properties:
− UTS Yield – 38 ksi, 35 ksi
− Elongation in 2” – 8%-10%
− Typical Properties:
− UTS Yield – 45 ksi, 41 ksi
− Elongation in 2” – 12%-17%
− Shear Strength – 30 ksi
 
Aluminum
Bar Data Table

 

 OCTG (OLAJ ÉS GÁZIPARI, PETROKÉMIAI CSÖVEK), ÉGHETŐ ANYAGOK VEZETÉSÉRE
ALKALMAS CSÖVEK
OCTG azaz az un. éghető anyagok vezetésére alkalmas csöveket elsősorban olaj és gázipar számára forgalmazzuk,
csővezeték építéshez, szerelési és karbantartási munkákhoz hossz hegesztett és spirál hegesztett kivitelben. Ezen termékeket
kombinálni tudjuk csőszigeteléssel is.
Méretválaszték: Ø 21,3-3500 mm
Szabványok: EN 10208-1, EN 10208-2
Minőségek: L245MB/NB, L290MB/NB, L360 MB/NB, L290 NB/MB, L415 NB/MB, L210GA, L235GA, L245GA, L290GA,
L360GA
Hosszak: 4-13 (20) m

 

OCTG (OIL, GAS, PETROCHEMICAL TUBES), TUBES SUITABLE FOR CONDUCTING
COMBUSTIBLE MATERIALS
We deal with our OCTG tubes (so called tubes suitable for conducting flammable materials) mainly for the petrochemical
oil and gas industry for big and smaller line pipe, maintenance project sin spirally welded and longitudinally welded typs.
Thes eproducts can be cominated with isolation and coatings.
Size assortment: Ø 21,3-3500 mm
Standards: EN 10208-1, EN 10208-2
Qualities: L245MB/NB, L290MB/NB, L360 MB/NB, L290 NB/MB, L415 NB/MB, L210GA, L235GA, L245GA, L290GA, L360GA
Lenghts: 4-13 (20) m

 

API 5CT J55 oil casing seamless pipe Steel Grades: K55, J55, L80-1 ,N80,C90,C95, P110, T95

 

 

 

Standard: API 5CT, API 5D
Steel Grades: K55, J55, L80-1 ,N80,C90,C95, P110, T95
Size: 2 3/8"-4 1/2"*0.167"-0630"

 

 

Casing Pipe

Tubing steel pipe

Oil Casing Pipe/Steel Pipe

Including ordinary casing, Anti-collapse casing, Anti-corrosion casing, Hi-strength casing

Serves as walls of a well;

Standard: API 5CT

Steel Grades: k55, J55, L80,N80,C90,C95, P110 T95, M65,E75,X95,G105,S135

 

 

1) Tubing

 

OD: 2 3/8" -----4 1/2"

WT: 0.167" -----0.630"

 

Note: P : Plain end, N: Non upset, U: External upset, T&C: Threaded and coupled.

 

2) Casing

 

OD: 2 3/8“ ----20"

WT: 0.205" --- 0.5"

Note: P: Plain end, S: Short round thread, L: Long round thread

 

Length

R1 R2 R3

Tubing 6.10 -7.32 m 8.53-9.75m 11.58-12.80m

Casing 4.88 - 7.62m 6.72 -10.36m 10.36 - 14.63m

 

3) Drill Pipe

OD: 2 3/8" - 5 1/2"

WT: 0.280" - 0.449"

Note: EU: External upset , IEU: Internal & External upset

Thread of tool joint are right-hand or left hand

 

Welded Casing and Tubing

Round Well Casing Pipe Continuously Cast Iron 80-55-06 Partially Pearlite Ductile Iron 0

Produced at Camrose, Calgary, Red Deer, and Regina.

Grades

  • API 5CT H40, J55, L80, N80 and P110; and proprietary E80.

Diameters

  • 2 3/8 - 16 in (60.3 - 406.4 mm)

Wall Thickness

  • 0.190 - 0.545 in (4.8 - 13.8 mm)

Lengths

  • Range 1, 2, and 3

 

Seamless Casing

FEATURING New Proprietary Seamless Casing Products!
 

Produced at Pueblo.

Grades

  • API 5CT N80, L80, P110 and proprietary CF95.
  • Proprietary ENA 80-SS
  • Proprietary ENA Q125-HCl

Diameters

  • 7 - 9 5/8 in (177.8 - 244.5 mm)

Wall Thickness

  • 0.317 - 0.595 in (8.5 - 15.1 mm)

 

API Oil pipe, Casing pipe

 

 

Type

Label 1

(in)

Outside diameter

(mm)

Wall thickness

(mm)

Grade Type of thread Length
Casing 4-1/2 114.30 5.21-8.56 H40-P110

STC

 

LC

 

BC

4.88-13.5m
5 127.00 5.59-12.70 H40-P110
5-1/2 139.70 6.20-22.22 H40-P110
6-5/8 168.28 7.32-12.06 H40-P110
7 177.80 5.87-22.22 H40-P110
Oil pipe 2-3/8 60.32 4.24-8.53 H40-P110

NU

 

EU

6.1-12.8m
2-7/8 73.02 5.51-11.18 H40-P110
3-1/2 88.90 5.49-13.46 H40-P110
4 101.60 5.74-15.49 H40-P110
4-1/2 114.30 6.88-16.00 H40-P110

 

Grade Yield Strength(Mpa) Tensile Strength(Mpa) Hardness
J55 379-522 >517  
K55 379-552 >655  
N80 552-758 >689  
L80-1 552-655 >689 23-241
C90 621-724 >689 25.4-255
C95 655-758 >724  
T95 655-758 >724 25.4-255
P110 758-965 >862  

 

 

API 5CT J55 oil casing seamless pipe  Pictures 

 

Round Well Casing Pipe Continuously Cast Iron 80-55-06 Partially Pearlite Ductile Iron 1