seamless casing pipe
"
SAWH Finish Erw Mild Steel Pipe Alloy 4130 Bars Heat Treated To Designation 75K Charpy V Notch Impact
Production Information : Alloy 4130 Characteristics We stock this quality of E-4130 to meet the regulations of API Spec.6A. Bars are heat treated to Designation 75K and are Charpy V-notch impact- tested to Classification K. Stocks also conform to NACE Standard MROI- 75 with a maximum hardness of HRC22/HB235. E-4130 is readily machineable and weldable. Typical Applications Flanges, wellhead components, tool joints, etc. Typical Heat Treatment Forging Commence 1200
ASTM A 53:2006 + ASME SA 53:2007 Seamless and welded black tubes suitable for zinc dipping”
Production Information : Name SSAW/Spiral Welded steel pipes 2.Standard API5L, ASTMA252, ASTMA139, ASMEB36.10,AWWAC200, EN10217,EN10219,EN10224,EN10025; SY/T5037,SY/T5040,GB/T9711.1/9711.2,API 5L, GB/T3091 Anticorrosive coating:AWWAC205,AWWAC210,AWWAC222,AWWAC214 3.Outer Diameter 219-3048mm 4.Wall Thickness 5mm30mm 5.Length 6m,12m or as per customer's requirements 6.Packing In bulk 7.Payment Term T/T, L/C at sight 8.Delivery Time within 20-40 days after receipt of deposit or
ASTM A 501:2007 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
Production Information : Name SSAW/Spiral Welded steel pipes 2.Standard API5L, ASTMA252, ASTMA139, ASMEB36.10,AWWAC200, EN10217,EN10219,EN10224,EN10025; SY/T5037,SY/T5040,GB/T9711.1/9711.2,API 5L, GB/T3091 Anticorrosive coating:AWWAC205,AWWAC210,AWWAC222,AWWAC214 3.Outer Diameter 219-3048mm 4.Wall Thickness 5mm30mm 5.Length 6m,12m or as per customer's requirements 6.Packing In bulk 7.Payment Term T/T, L/C at sight 8.Delivery Time within 20-40 days after receipt of deposit or
Sch120 Sch160 Stainless Steel Fittings Monel K500 N05500 Stainless Steel Pipe Caps
Product Name : Monel K500 N05500 Pipe Cap (Sch40, Sch80,(Sch40, Sch80, Sch120, Sch160) Wrought Carbon Steel Butt Weld Pipe Fittings Best Pipeline offer considerable advantage over other types of systems. A welded system is permanent, leak-proof and requires little or no maintenance. Welding construction uses a minimum of space, enabling it to be nested in corners or fitted against ceilings, walls or equipment. Domestic and import. Sizes: 1/2 to 48 Larger sizes available on
(S)A182 F5 F9 F11 F22 F91 Lap Joint Flange Blind Pipe Flanges
(S)A182 F5, F9, F11, F22, F91 lap joint flange weld nek wcb blind pipe flange wn carbon steel Product Type Blind Pipe flanges Standard ANSI, bs, DIN, GB, ISO, JIS, Jpi, ASME Size 1/2~48(Seamless);16~72(Welded) Wall thickness Sch5~Sch160XXS Manufacturing process Push, Press, Forge, Cast, etc. Material Carbon steel, stainless steel, alloy steel, duplex stainless, nickel alloy steel Carbon steel ASTM A234 WPB, WPC; Stainless steel 304/SUS304/UNS S30400/1.4301 304L/UNS
UNS32750 S31803 Duplex Stainless Steel Pipe With Super Duplex 2507 Bright Annealed Surface
Production Name : Super Duplex Stainless Steel Pipes Size : 14' We are Super Duplex Factory Specialized in Duplex 2250 /2507 Product Description Duplex Steel appeared in the marketplace due to the need to combat the shortcomings of austenitic and ferritic steels. It was found that a mixture of these two materials resulted in higher strength, reduced weight, good weld ability and increased resistance to stress corrosion cracking. Unlike similar steels, duplex also displays an
ASTM A53 Schedule 10 Steel Pipe Hot-Dipped Galvanizing With Plain Ends St40
Production Information : A53 ERW Steel PIPE SPECIFICATIONS A/SA53 NPS 1/4 30 Schedules 10 through 160, STD, XH and XXH ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas and air lines. It is suitable for welding and for forming operations involving coiling, bending, and flanging, subject to certain qualifications. American Piping Products stocks a full range
Carbon Steel Tubes and Pipes for Pressure Purposes at High Temperatures ASTM A 214/A 214M-96 (2001) , UNS K01807
Product Name : 440c stainless steel round bar Round Bar : Diameter 3-800mm U-bent tubes Standard metric dimensions EN 10216-2, tolerances acc. to EN 10305 inch dimensions ASME SA 556 C 2 ASTM A 179M 1990a, ASME SA 179M, ASME Section II part A Dimensions metric dimensions 10 x 1 mm to 30 x 2.5 mm inch dimensions 19.05 x 1.65 mm to 25.4 x 3.4 mm Tolerances metric dimensions acc. to EN 10305-1 inch dimensions outside diameter acc. to EN 10305-1 wall thickness 0/+20 % (SA 556M)
ISO 2604-II:1975 Mechanical Properties of Carbon Steel Tubes and Pipes for Pressure Purposes at High Temperatures
Product Name : 440c stainless steel round bar Round Bar : Diameter 3-800mm U-bent tubes Standard metric dimensions EN 10216-2, tolerances acc. to EN 10305 inch dimensions ASME SA 556 C 2 ASTM A 179M 1990a, ASME SA 179M, ASME Section II part A Dimensions metric dimensions 10 x 1 mm to 30 x 2.5 mm inch dimensions 19.05 x 1.65 mm to 25.4 x 3.4 mm Tolerances metric dimensions acc. to EN 10305-1 inch dimensions outside diameter acc. to EN 10305-1 wall thickness 0/+20 % (SA 556M)
