Lap Joint Flange

Grade : X6CrNi18-10 Number: 1.4948 Classification: Austenitic creep resisting steel Density: 7.9 g/cm ³ Standard: EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels EN 10222-5: 2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes EN 10269: 1999 Steels and nickel alloys for

Grade :X2CrNiN18-10Number:1.4311Classification:Austenitic stainless steelDensity:7.9 g/cm ³Standard:EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposesEN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposesEN 10028-7: 2007 Flat products made of steels for

ANSI/ASME BS16.5, B16.48 Series A & B BS4504, EN-1092, DIN ANSI ASME BS DIN EN GOST 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc The Weld Neck Ring (WNRF) is made of Inconel 600. Alloy 600 Slip On Ring Flange ASTM B564 UNS 06600 Blind Ring Flange SB 564 UNS 06600 Socket Weld Ring Flange The 2.4816 Inconel 600 threaded ring flange Nickel Alloy 600 Ring Ring Flange (LJRF). 2.4816 Alloy 60 Ring Type Joint Flange EN 10204/3.1B Raw Materials

Grade : S420MLH Number: 1.8848 Classification: Structural steel Standard: EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Chemical composition % of steel S420MLH (1.8848): EN 10219-1-2006 C Si Mn Ni P S Mo V N Nb Ti Al - max 0.16 max 0.5 max 1.7 max 0.3 max 0.03 max 0.025 max 0.2 max 0.12 max 0.02 max 0.05 max 0.05 max 0.02 Cr+Cu+Mo < 0.6 Mechanical properties of steel S420MLH (1.8848) Nominal

Grade : S355NH Number: 1.0539 Classification: Structural steel Standard: EN 10210-1: 2006 Hot finished structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements EN 10219-1: 2006 Cold formed welded structural hollow sections of non-alloy and fine grain steels. Technical delivery requirements Chemical composition % of steel S355NH (1.0539): EN 10210-1-2006 CEV < 0.43 / 0.45 for thickness 16 / 65 mm C Si Mn Ni P S Cr Mo V N Nb Ti Al Cu max 0

C45E Lap joint flanges 1.1191 forged flange asme b16.9 forged Steel Flange 1.1191 Forged Flanges Grade : C45E Number: 1.1191 Classification: Non-alloy quality special steel Standard: EN 10277-5: 2008 Bright steel products. Technical delivery conditions. Steels for quenching and tempering EN 10083-2: 2006 Steels for quenching and tempering. Technical delivery conditions for non alloy steels EN 10132-3: 2000 Cold rolled narrow steel strip for heat treatment. Technical delivery

Alloy C276 steel forged Lap Joint flanges Steel forged flanges Forged Stainless Steel 304 316 316L Alloy C276 The most universally corrosion resistant material available today, look no further than C276 Flange Material Stainless steel ANSI 304(L); ANSI 316(L) Duplex steel ASTM A182; S31803; S32205 Other material Titanium; C276 Flange Standard ASME B16.5/16.47 Class150 - Class2500 Flanges EN1092 (DIN) PN6-PN40 Flanges JIS 5K -20 K Flanges AS 15NB-1200NB Flanges GOST PN6-PN40

ANSI/DIN/En1092-1 Forged Carbon/Stainless Steel Pn10/16 Welding Neck/Blind/Slip on/Lap Joint/Flat Plate/Socket Flange Pressure 150LBS-2500LBS Standard ASME B16.9 DIN2616 DIN2615 DIN2605 BS 1640-3-1968 BS 1640-4-1968 JIS B2313 GOST17375 GOST17378 GB/T Material Stainless Steel F304 304L 304H 316 316L 310 310S 321 321H 317 317L 347 347H 904L SS31803 2205 2507 Forming type Forged or as required Main product Seamless & Welded steel pipe flange

Nickel Alloy 1.4558 Steel Forged Lap Joint Flanges incoloy 800 flange Lap Joint Flange 1.4558 Forged Steel Lap Joint Flanges Grade : X2NiCrAlTi32-20 Number: 1.4558 Classification: Austenitic corosion resisting steel Density: 8 g/cm ³ Standard: EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes. Stainless steel. Technical