Payment & Shipping Terms:
|Standard:||ASTM B392||Grade:||CARBON STEEL SEAMLESS TUBES|
|Technique:||0.27-0.63 % Manganese||Section:||Round /Square|
|Application:||Bolier Pipes||Sample:||Can Be Send For Free|
|Certificate:||CE||Place Of China:||Tianjin/Qingdao /Shanghai|
seamless steel tube,
seamless pipe steel
Product Name :ASTM B392 CARBON STEEL SEAMLESS TUBES with combination of 0.27-0.63 % manganese
ASTM B392 Carbon Steel Seamless Tubes are Low Carbon Steel Tubes with 0.06-0.18 % carbon content with combination of 0.27-0.63 % manganese. ASTM B392 Carbon Steel Seamless Tubes are also known as Also known as mild steel pipes and tubes ASTM B392 Tubes, are low-cost Low Carbon Steel Tubes with 0.06-0.18 % carbon content with combination of 0.27-0.63 % manganese. easy to form and shape. These pipes are manufactured as per ASTM Specification and commercially referred as cs pipes or ms pipes. Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.
|Yield||Tensile||Elongation A5 min|
|MPa min||ksi min||MPa min||MPa min||ksi min||Percentage|
|–||EN P235GH Grade 10216-2||–||ASTM A179 –||ASME SA 179 –||UNI C14|
ASTM B392 Carbon Steel Seamless Tubes
ASTM B392 Carbon Steel Seamless Tubes are cold drawn ASTM specification Tubes with low carbon content.A179 Tubes are IBR certified tubes used in heat exchangers.
Manufacturer: MSL, ISMT, JSL, JINDAL, TATA STEEL, BHUSHAN STEEL
Model: Carbon Steel Tubes
Product ID: ASTM
ASTM B392 Carbon Steel Seamless Tubes stockist in China
Best Pipeline stocks a complete range of IBR Certified ASTM B392 Carbon Steel Seamless Tubes in outer diameter tube sizes ½”-24” and Nominal bore NB sizes 15NB-600NB in Mumbai, India. Exporting Carbon Steel Pipes and Alloy Steel Pipes to countries worldwide including IRAN, IRAQ, KUWAIT, QATAR, South Africa, Nigeria, Saudi Arabia, Australia, Canada & Mexico.
Wall Thickness : the minimum wall thickness at any point or end on ASTM A179 pipes and tubes shall not be greater than 12.5% under the nominal thickness specified.
Inner Diameter: For pipe ordered in inside diameter, the inside diameter shall not vary more than ± 1% from the required/specified inside diameter.
2: Tolerance in Dimension:
|OD||GB/T3639(GB8713)||DIN2391(EN10305)||Our Tolerence||Best Quality|
|Tolerance in WT||±0.12mm||±0.10mm||±0.05mm||±0.03mm|
|Process||Diameter||Length||Precision||Inner Hole Roughness|
|Cold Rolled||30-100mm||≤12 m||H8-H10||0.4-1.6|
|Cold Draw||30-250mm||≤12 m||H8-H10||0.8-1.6|
According to the different needs of customers, seriously implement each order, let customers are satisfied
More than 20 years of careful management, customer first, quality first, the company expects to carry out multiple aspects of the level of cooperation with the customer